Quarter Arcades Sticker Set and Wallpaper: Where to Apply Them

Quick answer

Apply the Quarter Arcades Sticker Set to the cabinet's side panels, control panel and lower front, then hang the Quarter Arcades Wallpaper Accessory behind the cabinet as a scaled backdrop. Plan both placements before peeling any sticker so the display looks intentional, not cluttered.

How to place the stickers and wallpaper step by step

1. Measure the display zone first: Decide whether the wallpaper will back one cabinet or a row, then mark the 17.7in width and trim the 118in length to the height you need before hanging. Common mistake: sticking the full roll up first and discovering it extends past the shelf or into a doorway. Check that the trimmed wallpaper clears shelves, skirting boards and power outlets before removing any backing.
2. Hang the wallpaper before applying stickers: Apply the wallpaper to a clean, dry, flat wall behind the cabinet position, smoothing from the top down to keep the raised brick pattern aligned. Common mistake: placing stickers on the cabinet first, then finding the backdrop's brick lines sit at an awkward height behind them. Let the wallpaper settle fully before judging the display from a seated viewing height.
3. Map sticker zones on the cabinet: Lay the stickers out without peeling and assign the power sockets and fire exit sign to lower or side panels, the clock and gaming posters to upper side panels, and the no smoking sign near the coin or control area. Common mistake: centering every sticker, which flattens the arcade look and ignores how real cabinets group signage. Photograph the dry layout on your phone so you can restore it after peeling.
4. Apply from largest to smallest: Peel and press the gaming posters first to establish the main visual anchors, then add the clock, signs and power sockets around them, pressing firmly from the center outward. Common mistake: starting with tiny stickers, which leaves no room for the larger posters and forces awkward spacing. Keep a fingernail or squeegee handy to push out air bubbles as you go.
5. Step back and edit: View the finished cabinet from your normal seating distance and remove or reposition any sticker that crowds the silhouette or hides cabinet details. Common mistake: filling every blank panel because the stickers are available, which makes the quarter-scale cabinet look busy rather than authentic. Leave at least one clean panel so the cabinet's own finish still reads.

Product facts

• Quarter Arcades Sticker Set: The easy-peel sticker set includes power sockets in US and UK designs, a no smoking sign, a fire exit sign, a clock and gaming posters including a high score tournament poster. The mix lets you assign realistic signage to the correct zones of the cabinet instead of scattering stickers at random.

  

• Quarter Arcades Wallpaper Accessory: The wallpaper is 17.7in (45cm) wide by 118in (300cm) long with a raised red brick pattern scaled to fit Quarter Arcades cabs. The length allows a continuous backdrop across a shelf of multiple cabs, while the width sets how much wall the display will cover.